Implemented PozyxI2C

pypozyx/__init__.py

@@ -80,6 +80,7 @@
 
 from pypozyx.definitions import *
 from pypozyx.pozyx_serial import *
+from pypozyx.pozyx_i2c import *
 from pypozyx.structures.device import *
 from pypozyx.structures.generic import *
 from pypozyx.structures.sensor_data import *

pypozyx/definitions/constants.py

@@ -8,6 +8,9 @@
 
 
 class PozyxConstants:
+    # I2C
+    POZYX_I2C_ADDRESS = 0x4B
+
     # Pozyx serial buffer sizes
     MAX_BUF_SIZE = 100
     MAX_SERIAL_SIZE = 28

pypozyx/lib.py

@@ -1117,10 +1117,10 @@ def doPositioning(self, position, dimension=PozyxConstants.DIMENSION_3D, height=
 
     def getPositioningData(self, positioning_data):
         flags = Data([positioning_data.flags], 'H')
-        flags.load_hex_string()
-        s = 'F,%0.2x,%s,%i\r' % (PozyxRegisters.DO_POSITIONING_WITH_DATA, flags.byte_data, positioning_data.byte_size + 61)
-        # very custom solution...
-        r = self.serialExchange(s)
+        temp_data = Data([0] * (positioning_data.byte_size + 60))
+        ret = self.useFunction(PozyxRegisters.DO_POSITIONING_WITH_DATA, flags, temp_data)
+        temp_data.load_hex_string()
+        r = ('%0.2x' % ret) + temp_data.byte_data
         if positioning_data.has_ranges():
             amount_of_ranges = int(r[2 * positioning_data.byte_size:2 * positioning_data.byte_size + 2], 16)
             positioning_data.set_amount_of_ranges(amount_of_ranges)

pypozyx/pozyx_i2c.py

@@ -1,34 +1,140 @@
-#!/usr/bin/env python
-"""
+"""pypozyx.pozyx_i2c - contains the I2C interface with Pozyx through PozyxI2C."""
+from pypozyx.core import PozyxConnectionError
 
-"""
+from pypozyx.definitions.constants import (POZYX_SUCCESS, POZYX_FAILURE,
+                                           PozyxConstants)
 
 from pypozyx.lib import PozyxLib
-from pypozyx.definitions.constants import MODE_POLLING
-# from pypozyx.definitions.registers import *
+from pypozyx.structures.generic import SingleRegister
+from smbus2 import SMBus, i2c_msg
+
+from warnings import warn
 
 
 class PozyxI2C(PozyxLib):
+    """This class provides the Pozyx I2C interface.
+    All functionality from PozyxLib and PozyxCore is included.
+
+    Args:
+        bus: i2c bus number (e.g. 0 or 1) or an absolute file path (e.g. `/dev/i2c-42`).
+        print_output (optional): boolean for printing the serial exchanges, mainly for debugging purposes
+        suppress_warnings (optional): boolean for suppressing warnings in the Pozyx use, usage not recommended
+        debug_trace (optional): boolean for printing the trace on bad serial init (DEPRECATED)
+        show_trace (optional): boolean for printing the trace on bad serial init (DEPRECATED)
+    """
+
+    def __init__(self, bus=1,
+                 print_output=False, debug_trace=False, show_trace=False,
+                 suppress_warnings=False):
+        """Initializes the PozyxI2C object. See above for details."""
+        super(PozyxI2C, self).__init__()
+        self.print_output = print_output
+        if debug_trace is True or show_trace is True:
+            if not suppress_warnings:
+                warn("debug_trace or show_trace are on their way out, exceptions of the type PozyxException are now raised.",
+                     DeprecationWarning)
+        self.suppress_warnings = suppress_warnings
 
-    def __init__(self, mode=MODE_POLLING, print_output=False):
-        pass
+        self.bus = SMBus(bus)
+
+        self.validatePozyx()
+
+    def validatePozyx(self):
+        """Validates whether the connected device is indeed a Pozyx device"""
+        whoami = SingleRegister()
+        if self.getWhoAmI(whoami) != POZYX_SUCCESS:
+            raise PozyxConnectionError("Connected to device, but couldn't read I2C data. Is it a Pozyx?")
+        if whoami.value != 0x43:
+            raise PozyxConnectionError("POZYX_WHO_AM_I returned 0x%0.2x, something is wrong with Pozyx." % whoami.value)
 
     def regWrite(self, address, data):
-        pass
+        """
+        Writes data to the Pozyx registers, starting at a register address,
+        if registers are writable.
+
+        Args:
+            address: Register address to start writing at.
+            data: Data to write to the Pozyx registers.
+                Has to be ByteStructure-derived object.
+
+        Returns:
+            POZYX_SUCCESS, POZYX_FAILURE
+        """
+        bdata = data.transform_to_bytes()
+        try:
+            msg_addr  = i2c_msg.write(PozyxConstants.POZYX_I2C_ADDRESS, bytes([address]))
+            msg_write = i2c_msg.write(PozyxConstants.POZYX_I2C_ADDRESS, bdata)
+            self.bus.i2c_rdwr(msg_addr, msg_write)
+        except OSError:
+            return POZYX_FAILURE
+        return POZYX_SUCCESS
 
     def regRead(self, address, data):
-        pass
+        """
+        Reads data from the Pozyx registers, starting at a register address,
+        if registers are readable.
+
+        Args:
+            address: Register address to start writing at.
+            data: Data to read from the Pozyx registers.
+                Has to be ByteStructure-derived object.
+
+        Returns:
+            POZYX_SUCCESS, POZYX_FAILURE
+        """
+        try:
+            msg_addr = i2c_msg.write(PozyxConstants.POZYX_I2C_ADDRESS, bytes([address]))
+            msg_read = i2c_msg.read(PozyxConstants.POZYX_I2C_ADDRESS, data.byte_size)
+            self.bus.i2c_rdwr(msg_addr, msg_read)
+            r = bytes(msg_read)
+        except OSError:
+            return POZYX_FAILURE
+        data.load_packed(r)
+        return POZYX_SUCCESS
 
     def regFunction(self, address, params, data):
-        pass
+        """
+        Performs a register function on the Pozyx, if the address is a register
+        function.
+
+        Args:
+            address: Register function address of function to perform.
+            params: Parameters for the register function.
+                Has to be ByteStructure-derived object.
+            data: Container for the data the register function returns.
+                Has to be ByteStructure-derived object.
+
+        Returns:
+            POZYX_SUCCESS, POZYX_FAILURE
+        """
+        bparams = params.transform_to_bytes()
+        try:
+            msg_write = i2c_msg.write(PozyxConstants.POZYX_I2C_ADDRESS, bytes([address]) + bytes(bparams))
+            msg_read  = i2c_msg.read(PozyxConstants.POZYX_I2C_ADDRESS, data.byte_size + 1)
+            self.bus.i2c_rdwr(msg_write, msg_read)
+            r = bytes(msg_read)
+        except OSError:
+            return POZYX_FAILURE
+        if len(data) > 0:
+            data.load_packed(r[1:])
+        return r[0]
+
+    def waitForFlag(self, interrupt_flag, timeout_s, interrupt):
+        """
+        Waits for a certain interrupt flag to be triggered, indicating that
+        that type of interrupt occured.
 
-    #
-    def waitForFlag(self, interrupt_flag, timeout_ms, interrupt):
-        pass
+        Args:
+            interrupt_flag: Flag indicating interrupt type.
+            timeout_s: time in seconds that POZYX_INT_STATUS will be checked
+                for the flag before returning POZYX_TIMEOUT.
 
-    #
-    def waitForFlagSafe(self, interrupt_flag, timeout_ms, interrupt):
-        pass
+        Kwargs:
+            interrupt: Container for the POZYX_INT_STATUS data
 
-    def configInterruptPin(self, pin, mode, bActiveHigh, bLatch, remote_id=None):
-        pass
+        Returns:
+            POZYX_SUCCESS, POZYX_FAILURE, POZYX_TIMEOUT
+        """
+        if interrupt is None:
+            interrupt = SingleRegister()
+        return self.waitForFlagSafe(interrupt_flag, timeout_s, interrupt)

pypozyx/pozyx_serial.py

@@ -250,7 +250,7 @@ def regRead(self, address, data):
 
         Args:
             address: Register address to start writing at.
-            data: Data to write to the Pozyx registers.
+            data: Data to read from the Pozyx registers.
                 Has to be ByteStructure-derived object.
 
         Returns:

requirements.txt

@@ -1 +1,2 @@
 pyserial>=3.0
+smbus2>=0.3.0

setup.py

@@ -18,6 +18,7 @@
     description='Python library for Pozyx devices',
     install_requires=[
         'pyserial>=3.0'
+        'smbus2>=0.3.0'
     ],
     long_description=long_description,
     author='Laurent Van Acker',