Klipper configuration backups.
Backups for Voron 2.4 300mm build with Fysetc Spider 1.1 MCU, Mellow Fly SHT-36 v2/UTOC, ERCF v2 with Fly Easy Brd CAN 1.1 MCU.
12 Lane Tradrack with EREC cutter and Binky encoder.
| Component | PIN |
|---|---|
| Hotend Fan | SHT:PB10/FAN0 |
| Hotend Heater | SHT:HE0 |
| Hotend Sensor | SHT:TH0 |
| Part Fan | SHT:PB11/FAN1 |
| Component Fan | MCU:PB2 |
| Toolhead PCB cooler | SHT:PROBE_2 |
| Chamber Fan | MCU:PC8 |
| Chamber LEDS | MCU:PB3 |
| Endstop - X | SHT:PA1/LIMIT_0 |
| Endstop - Y | MCU:PA2 |
| Endstop - Z | MCU:PA0 |
| Probe - PCB Klicky | SHT:PC15/PROBE_1 |
| Toolhead sensor | SHT:PA2/LIMIT_1 |
| Chamber Thermistor | MCU:PC1 |
| Bed Thermister | MCU:PC3 |
| Print Head Neopixels | MCU:PD3 |
| Nevermore | MCU:PB7 (LED-B 24V) |
| Blobifier tray/bucket | MCU:PB13 |
| Blobifier servo | MCU:PA3 |
| Spare Pins (Spider 1.1) | |
| FAN0 | MCU:PB0 |
| FAN1 | MCU:PB1 |
| End Stop | MCU:PA1 |
| Limit Switch/End stop | MCU:PB14 |
| Thermister | MCU:PC0 |
| Thermister | MCU:PC2 |
| 12864 Beeper | MCU:PC9 |
PRINT_START gcode
SET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]
;
MMU_START_SETUP INITIAL_TOOL={initial_tool} REFERENCED_TOOLS=!referenced_tools! TOOL_COLORS=!colors! TOOL_TEMPS=!temperatures! TOOL_MATERIALS=!materials! FILAMENT_NAMES=!filament_names! PURGE_VOLUMES=!purge_volumes!
;
MMU_START_CHECK
;
PRINT_START EXTRUDER=[first_layer_temperature[initial_extruder]] BED=[first_layer_bed_temperature] CHAMBER=[chamber_temperature] FILAMENT=[filament_type] NOZZLE=[nozzle_diameter] TOOL=[initial_extruder] SIZE={first_layer_print_min[0]}_{first_layer_print_min[1]}_{first_layer_print_max[0]}_{first_layer_print_max[1]}
LAYER_CHANGE gcode
SET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}
FILAMENT_CHANGE gcode
T[next_extruder] ; MMU tool change
PRINT_END gcode
MMU_END
PRINT_END