Introduction

The goal of this style guide is to present a set of best practices and style guidelines for one AngularJS application. These best practices are collected from:

AngularJS source code
Source code or articles I've read
My own experience

Note 1: this is still a draft of the style guide, its main goal is to be community-driven so filling the gaps will be greatly appreciated by the whole community.

Note 2: before following any of the guidelines in the translations of the English document, make sure they are up-to date. The latest version of the AngularJS style guide is in the current document.

In this style guide you won't find common guidelines for JavaScript development. Such can be found at:

For AngularJS development recommended is the Google's JavaScript style guide.

In AngularJS's GitHub wiki there is a similar section by ProLoser, you can check it here.

Translations

Table of content

General
Modules
Controllers
Directives
Filters
Services
Templates
Routing
E2E Testing
i18n
Performance
Contribution
Contributors

General

Directory structure

Since a large AngularJS application has many components it's best to structure it in a directory hierarchy. There are two main approaches:

Creating high-level divisions by component types and lower-level divisions by functionality.

In this way the directory structure will look like:

.
├── app
│   ├── app.js
│   ├── controllers
│   │   ├── home
│   │   │   ├── FirstCtrl.js
│   │   │   └── FirstCtrl.spec.js
│   │   │   └── SecondCtrl.js
│   │   │   └── SecondCtrl.spec.js
│   │   └── about
│   │       └── ThirdCtrl.js
│   │       └── ThirdCtrl.spec.js
│   ├── directives
│   │   ├── home
│   │   │   └── directive1.js
│   │   │   └── directive1.spec.js
│   │   └── about
│   │       ├── directive2.js
│   │       ├── directive2.spec.js
│   │       └── directive3.js
│   │       └── directive3.spec.js
│   ├── filters
│   │   ├── home
│   │   └── about
│   └── services
│       ├── CommonService.js
│       ├── CommonService.spec.js
│       ├── cache
│       │   ├── Cache1.js
│       │   ├── Cache1.spec.js
│       │   └── Cache2.js
│       │   └── Cache2.spec.js
│       └── models
│           ├── Model1.spec.js
│           ├── Model1.js
│           └── Model2.spec.js
│           └── Model2.js
├── partials
├── lib
└── e2e-tests

Creating high-level divisions by functionality and lower-level divisions by component types.

Here is its layout:

.
├── app
│   ├── app.js
│   ├── common
│   │   ├── controllers
│   │   ├── directives
│   │   ├── filters
│   │   └── services
│   ├── home
│   │   ├── controllers
│   │   │   ├── FirstCtrl.js
│   │   │   ├── FirstCtrl.spec.js
│   │   │   └── SecondCtrl.js
│   │   │   └── SecondCtrl.spec.js
│   │   ├── directives
│   │   │   └── directive1.js
│   │   │   └── directive1.spec.js
│   │   ├── filters
│   │   │   ├── filter1.js
│   │   │   ├── filter1.spec.js
│   │   │   └── filter2.js
│   │   │   └── filter2.spec.js
│   │   └── services
│   │       ├── service1.js
│   │       ├── service1.spec.js
│   │       └── service2.js
│   │       └── service2.spec.js
│   └── about
│       ├── controllers
│       │   └── ThirdCtrl.js
│       │   └── ThirdCtrl.spec.js
│       ├── directives
│       │   ├── directive2.js
│       │   ├── directive2.spec.js
│       │   └── directive3.js
│       │   └── directive3.spec.js
│       ├── filters
│       │   └── filter3.js
│       │   └── filter3.spec.js
│       └── services
│           └── service3.js
│           └── service3.spec.js
├── partials
├── lib
└── e2e-tests

In case the directory name contains multiple words, use lisp-case syntax:

app
 ├── app.js
 └── my-complex-module
     ├── controllers
     ├── directives
     ├── filters
     └── services

Put all the files associated with the given directive (i.e. templates, CSS/SASS files, JavaScript) in a single folder. If you choose to use this style be consistent and use it everywhere along your project.

app
└── directives
    ├── directive1
    │   ├── directive1.html
    │   ├── directive1.js
    │   ├── directive1.spec.js
    │   └── directive1.sass
    └── directive2
        ├── directive2.html
        ├── directive2.js
        ├── directive2.spec.js
        └── directive2.sass

This approach can be combined with both directory structures above.

The unit tests for a given component (*.spec.js) should be located in the directory where the component is. This way when you make changes to a given component finding its test is easy. The tests also act as documentation and show use cases.

services
├── cache
│   ├── cache1.js
│   └── cache1.spec.js
└── models
    ├── model1.js
    └── model1.spec.js

The app.js file should contain route definitions, configuration and/or manual bootstrap (if required).
Each JavaScript file should only hold a single component. The file should be named with the component's name.
Use AngularJS project structure template like Yeoman, ng-boilerplate.

Conventions about component naming can be found in each component section.

Markup

TLDR; Put the scripts at the bottom.

<!DOCTYPE html>
<html lang="en">
<head>
  <meta charset="utf-8">
  <title>MyApp</title>
</head>
<body>
  <div ng-app="myApp">
    <div ng-view></div>
  </div>
  <script src="angular.js"></script>
  <script src="app.js"></script>
</body>
</html>

Keep things simple and put AngularJS specific directives after standard attributes. This will make it easier to skim your code and will make it easier to maintain because your attributes are consistently grouped and positioned.

<form class="frm" ng-submit="login.authenticate()">
  <div>
    <input class="ipt" type="text" placeholder="name" require ng-model="user.name">
  </div>
</form>

Other HTML attributes should follow the Code Guide's recommendation

Naming conventions

The following table is shown the naming conventions for every element:

Element	Naming style	Example	usage
Modules	lowerCamelCase	angularApp
Controllers	Functionality + 'Ctrl'	AdminCtrl
Directives	lowerCamelCase	userInfo
Filters	lowerCamelCase	userFilter
Services	UpperCamelCase	User	constructor
Factories	lowerCamelCase	dataFactory	others

Others

Use:
- $timeout instead of setTimeout
- $interval instead of setInterval
- $window instead of window
- $document instead of document
- $http instead of $.ajax
- $location instead of window.location or $window.location
- $cookies instead of document.cookie

This will make your testing easier and in some cases prevent unexpected behaviour (for example, if you missed $scope.$apply in setTimeout).

Automate your workflow using tools like:
- NPM
- Grunt
- Gulp
- Yeoman
- Bower
Use promises ($q) instead of callbacks. It will make your code look more elegant and clean, and save you from callback hell.
Use $resource instead of $http when possible. The higher level of abstraction will save you from redundancy.
Use an AngularJS pre-minifier (ng-annotate) for preventing problems after minification.
Don't use globals. Resolve all dependencies using Dependency Injection, this will prevent bugs and monkey patching when testing.
Avoid globals by using Grunt/Gulp to wrap your code in Immediately Invoked Function Expression (IIFE). You can use plugins like grunt-wrap or gulp-wrap for this purpose. Example (using Gulp)
```
 gulp.src("./src/*.js")
 .pipe(wrap('(function(){\n"use strict";\n<%= contents %>\n})();'))
 .pipe(gulp.dest("./dist"));
```
Do not pollute your $scope. Only add functions and variables that are being used in the templates.
Prefer the usage of controllers instead of ngInit. There are only a few appropriate uses of ngInit, such as for aliasing special properties of ngRepeat, and for injecting data via server side scripting. Besides these few cases, you should use controllers rather than ngInit to initialize values on a scope. The expression passed to ngInit should go through lexing, parsing and evaluation by the Angular interpreter implemented inside the $parse service. This leads to:
- Performance impact, because the interpreter is implemented in JavaScript
- The caching of the parsed expressions inside the $parse service doesn't make a lot of sense in most cases, since ngInit expressions are often evaluated only once
- Is error-prone, since you're writing strings inside your templates, there's no syntax highlighting and further support by your editor
- No run-time errors are thrown
Do not use $ prefix for the names of variables, properties and methods. This prefix is reserved for AngularJS usage.
Do not use JQUERY inside your app, If you must, use JQLite instead with angular.element.
When resolving dependencies through the DI mechanism of AngularJS, sort the dependencies by their type - the built-in AngularJS dependencies should be first, followed by your custom ones:

module.factory('Service', function ($rootScope, $timeout, MyCustomDependency1, MyCustomDependency2) {
  return {
    //Something
  };
});

Modules

Modules should be named with lowerCamelCase. For indicating that module b is submodule of module a you can nest them by using namespacing like: a.b.

There are two common ways for structuring the modules:
1. By functionality
2. By component type
Currently there's not a big difference, but the first way looks cleaner. Also, if lazy-loading modules is implemented (currently not in the AngularJS roadmap), it will improve the app's performance.

Controllers

Do not manipulate DOM in your controllers, this will make your controllers harder for testing and will violate the Separation of Concerns principle. Use directives instead.
The naming of the controller is done using the controller's functionality (for example shopping cart, homepage, admin panel) and the substring Ctrl in the end.
Controllers are plain javascript constructors, so they will be named UpperCamelCase (HomePageCtrl, ShoppingCartCtrl, AdminPanelCtrl, etc.).
The controllers should not be defined as globals (even though AngularJS allows this, it is a bad practice to pollute the global namespace).

Use the following syntax for defining controllers:

function MyCtrl(dependency1, dependency2, ..., dependencyn) {
  // ...
}
module.controller('MyCtrl', MyCtrl);

In order to prevent problems with minification, you can automatically generate the array definition syntax from the standard one using tools like ng-annotate (and grunt task grunt-ng-annotate).

Another alternative will be to use $inject like:

angular
 .module('app')
 .controller('HomepageCtrl', HomepageCtrl);

HomepageCtrl.$inject = ['$log', '$http', 'ngRoute'];

function HomepageCtrl($log, $http, ngRoute) {
 // ...
}

Avoid use of $scope service to define functions and properties as part of controllers. Use $scope only if It's really needed: 0. For publish and subscribe to events: $scope.$emit, $scope.$broadcast, and $scope.$on. 0. For watch values or collections: $scope.$watch, $scope.$watchCollection

Prefer using controller as syntax and capture this using a variable:

<div ng-controller="MainCtrl as main">
   {{ main.things }}
</div>

app.controller('MainCtrl', MainCtrl);
MainCtrl.$inject = ['$http'];

function MainCtrl ($http) {
  var vm = this;
  //a clearer visual connection on how is defined on the view
  vm.title = 'Some title';
  vm.description = 'Some description';

  $http.get('/api/main/things').then(function (response) {
      vm.things = response.data.things; // Adding 'things' as a property of the controller
  });
}

Avoid using this keyword repeatedly inside a controller:

  app.controller('MainCtrl', MainCtrl);
  MainCtrl.$inject = ['$http'];

  // Avoid
  function MainCtrl ($http) {
    this.title = 'Some title';
    this.description = 'Some description';

    $http.get('/api/main/things').then(function (response) {
        // Warning! 'this' is in a different context here.
        // The property will not be added as part of the controller context
        this.things = response.data.things;
    });
  }

Using a consistent and short variable name is preferred, for example vm.

The main benefits of using this syntax:

Creates an 'isolated' component - binded properties are not part of $scope prototype chain. This is good practice since $scope prototype inheritance has some major drawbacks (this is probably the reason it was removed on Angular 2):
- It is hard to track where data is coming from.
- Scope's value changes can affect places you did not intend to affect.
- Harder to refactor.
- The 'dot rule'.
Removes the use of $scope when no need for special operations (as mentioned above). This is a good preparation for AngularJS V2.
Syntax is closer to that of a 'vanilla' JavaScript constructor

Digging more into controller as: digging-into-angulars-controller-as-syntax

If using array definition syntax, use the original names of the controller's dependencies. This will help you produce more readable code:
```
function MyCtrl(l, h) {
  // ...
}

module.controller('MyCtrl', ['$log', '$http', MyCtrl]);
```
which is less readable than:
```
function MyCtrl($log, $http) {
  // ...
}

module.controller('MyCtrl', ['$log', '$http', MyCtrl]);
```
This especially applies to a file that has so much code that you'd need to scroll through. This would possibly cause you to forget which variable is tied to which dependency.
Make the controllers as lean as possible. Abstract commonly used functions into a service.

Avoid writing business logic inside controllers. Delegate business logic to a model, using a service. For example:

//This is a common behaviour (bad example) of using business logic inside a controller.
angular.module('Store', [])
.controller('OrderCtrl', function () {
  var vm = this;

  vm.items = [];

  vm.addToOrder = function (item) {
    vm.items.push(item);//-->Business logic inside controller
  };

  vm.removeFromOrder = function (item) {
    vm.items.splice(vm.items.indexOf(item), 1);//-->Business logic inside controller
  };

  vm.totalPrice = function () {
    return vm.items.reduce(function (memo, item) {
      return memo + (item.qty * item.price);//-->Business logic inside controller
    }, 0);
  };
});

When delegating business logic into a 'model' service, controller will look like this (see 'use services as your Model' for service-model implementation):

// order is used as a 'model'
angular.module('Store', [])
.controller('OrderCtrl', function (order) {
  var vm = this;

  vm.items = order.items;

  vm.addToOrder = function (item) {
    order.addToOrder(item);
  };

  vm.removeFromOrder = function (item) {
    order.removeFromOrder(item);
  };

  vm.totalPrice = function () {
    return order.total();
  };
});

Why business logic / app state inside controllers is bad?

Controllers instantiated for each view and dies when the view unloads
Controllers are not reusable - they are coupled with the view
Controllers are not meant to be injected

Communicate within different controllers using method invocation (possible when a child wants to communicate with its parent) or $emit, $broadcast and $on methods. The emitted and broadcasted messages should be kept to a minimum.

Make a list of all messages which are passed using $emit, $broadcast and manage it carefully because of name collisions and possible bugs.

Example:

// app.js
/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Custom events:
  - 'authorization-message' - description of the message
    - { user, role, action } - data format
      - user - a string, which contains the username
      - role - an ID of the role the user has
      - action - specific action the user tries to perform
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * */

When you need to format data encapsulate the formatting logic into a filter and declare it as dependency:

function myFormat() {
  return function () {
    // ...
  };
}
module.filter('myFormat', myFormat);

function MyCtrl($scope, myFormatFilter) {
  // ...
}

module.controller('MyCtrl', MyCtrl);

In case of nested controllers use "nested scoping" (the controllerAs syntax):

app.js

module.config(function ($routeProvider) {
  $routeProvider
    .when('/route', {
      templateUrl: 'partials/template.html',
      controller: 'HomeCtrl',
      controllerAs: 'home'
    });
});

HomeCtrl

function HomeCtrl() {
  var vm = this;

  vm.bindingValue = 42;
}

template.html

<div ng-bind="home.bindingValue"></div>

Directives

Name your directives with lowerCamelCase.
Use scope instead of $scope in your link function. In the compile, post/pre link functions you have already defined arguments which will be passed when the function is invoked, you won't be able to change them using DI. This style is also used in AngularJS's source code.
Use custom prefixes for your directives to prevent name collisions with third-party libraries.
Do not use ng or ui prefixes since they are reserved for AngularJS and AngularJS UI usage.
DOM manipulations must be done only through directives.
Create an isolated scope when you develop reusable components.
Use directives as attributes or elements instead of comments or classes, this will make your code more readable.
Use scope.$on('$destroy', fn) for cleaning up. This is especially useful when you're wrapping third-party plugins as directives.
Do not forget to use $sce when you should deal with untrusted content.

Filters

Name your filters with lowerCamelCase.
Make your filters as light as possible. They are called often during the $digest loop so creating a slow filter will slow down your app.
Do a single thing in your filters, keep them coherent. More complex manipulations can be achieved by piping existing filters.

Services

This section includes information about the service component in AngularJS. It is not dependent of the way of definition (i.e. as provider, .factory, .service), except if explicitly mentioned.

Use camelCase to name your services.

UpperCamelCase (PascalCase) for naming your services, used as constructor functions i.e.:

function MainCtrl(User) {
    var vm = this;
    vm.user = new User('foo', 42);
}

module.controller('MainCtrl', MainCtrl);

function User(name, age) {
  this.name = name;
  this.age = age;
}

module.factory('User', function () {
  return User;
});

lowerCamelCase for all other services.

Encapsulate all the business logic in services. Prefer using it as your model. For example:

// order is the 'model'
angular.module('Store')
.factory('order', function () {
    var add = function (item) {
      this.items.push (item);
    };

    var remove = function (item) {
      if (this.items.indexOf(item) > -1) {
        this.items.splice(this.items.indexOf(item), 1);
      }
    };

    var total = function () {
      return this.items.reduce(function (memo, item) {
        return memo + (item.qty * item.price);
      }, 0);
    };

    return {
      items: [],
      addToOrder: add,
      removeFromOrder: remove,
      totalPrice: total
    };
});

See 'Avoid writing business logic inside controllers' for an example of a controller consuming this service.

Services representing the domain preferably a service instead of a factory. In this way we can take advantage of the "klassical" inheritance easier:

 function Human() {
   //body
 }
 Human.prototype.talk = function () {
   return "I'm talking";
 };

 function Developer() {
   //body
 }
 Developer.prototype = Object.create(Human.prototype);
 Developer.prototype.code = function () {
   return "I'm coding";
 };

 myModule.service('human', Human);
 myModule.service('developer', Developer);

For session-level cache you can use $cacheFactory. This should be used to cache results from requests or heavy computations.

If given service requires configuration define the service as provider and configure it in the config callback like:

 angular.module('demo', [])
 .config(function ($provide) {
   $provide.provider('sample', function () {
     var foo = 42;
     return {
       setFoo: function (f) {
         foo = f;
       },
       $get: function () {
         return {
           foo: foo
         };
       }
     };
   });
 });

 var demo = angular.module('demo');

 demo.config(function (sampleProvider) {
   sampleProvider.setFoo(41);
 });

Templates

Use ng-bind or ng-cloak instead of simple {{ }} to prevent flashing content.
Avoid writing complex expressions in the templates.
When you need to set the src of an image dynamically use ng-src instead of src with {{ }} template.
When you need to set the href of an anchor tag dynamically use ng-href instead of href with {{ }} template.
Instead of using scope variable as string and using it with style attribute with {{ }}, use the directive ng-style with object-like parameters and scope variables as values:

    <div ng-controller="MainCtrl as main">
        <div ng-style="main.divStyle">my beautifully styled div which will work in IE</div>;
    </div>

  angular
    .module('app')
    .controller('MainCtrl', MainCtrl);

  MainCtrl.$inject = [];

  function MainCtrl() {
    var vm = this;
    vm.divStyle = {
        width: 200,
        position: 'relative'
    };
  }

Routing

Use resolve to resolve dependencies before the view is shown.
Do not place explicit RESTful calls inside the resolve callback. Isolate all the requests inside appropriate services. This way you can enable caching and follow the separation of concerns principle.

E2E Testing

E2E tests are the next common sense step after unit tests, that will allow you to trace bugs and errors in the behaviour of your system. They are great for providing a sanity check that most common scenarios of using your application works. This way you can automate the process and run it each time before you deploy your application.

Ideally, Angular End-to-End tests are written in Jasmine. These tests are run using the Protractor E2E test runner which uses native events and has special features for Angular applications.

File structure:

.
├── app
│   ├── app.js
│   ├── home
│   │   ├── home.html
│   │   ├── controllers
│   │   │   ├── FirstCtrl.js
│   │   │   ├── FirstCtrl.spec.js
│   │   ├── directives
│   │   │   └── directive1.js
│   │   │   └── directive1.spec.js
│   │   ├── filters
│   │   │   ├── filter1.js
│   │   │   └── filter1.spec.js
│   │   └── services
│   │       ├── service1.js
│   │       └── service1.spec.js
│   └── about
│       ├── about.html
│       ├── controllers
│       │   └── ThirdCtrl.js
│       │   └── ThirdCtrl.spec.js
│       └── directives
│           ├── directive2.js
│           └── directive2.spec.js
├── partials
├── lib
└── e2e-tests
    ├── protractor.conf.js
    └── specs
        ├── home.js
        └── about.js

i18n

For newer versions of the framework (>=1.4.0) use the built-in i18n tools, when using older versions (<1.4.0) use angular-translate.

Performance

Optimize the digest cycle
- Watch only the most vital variables. When required to invoke the $digest loop explicitly (it should happen only in exceptional cases), invoke it only when required (for example: when using real-time communication, don't cause a $digest loop in each received message).
- For content that is initialized only once and then never changed, use single-time watchers like bindonce for older versions of AngularJS or one-time bindings in AngularJS >=1.3.0.
```
 <div>
   {{ ::main.things }}
 </div>
```
  or
```
   <div ng-bind="::main.things"></div>
```
  After that, no watchers will be created for main.things and any changes of main.things will not update the view.
- Make the computations in $watch as simple as possible. Making heavy and slow computations in a single $watch will slow down the whole application (the $digest loop is done in a single thread because of the single-threaded nature of JavaScript).
- When watching collections, do not watch them deeply when not strongly required. Better use $watchCollection, which performs a shallow check for equality of the result of the watched expression and the previous value of the expression's evaluation.
- Set third parameter in $timeout function to false to skip the $digest loop when no watched variables are impacted by the invocation of the $timeout callback function.
- When dealing with big collections, which change rarely, use immutable data structures.
Consider decreasing number of network requests by bundling/caching html template files into your main javascript file, using grunt-html2js / gulp-html2js. See here and here for details. This is particularly useful when the project has a lot of small html templates that can be a part of the main (minified and gzipped) javascript file.

Contribution

Since the goal of this style guide is to be community-driven, contributions are greatly appreciated. For example, you can contribute by extending the Testing section or by translating the style guide to your language.

Contributors


mgechev	morizotter	chatii2412	pascalockert	yanivefraim	ericguirbal


agnislav	ray7551	mainyaa	LeonardCModoran	elfinxx	tiagobarreto


Xuefeng-Zhu	SullyP	giacomocusinato	rubystream	lukaszklis	Spuffynism


susieyy	cironunes	cavarzan	guiltry	MSafter	mingchen


jmblog	luixaviles	andreasonny83	kuzzmi	jabhishek	adambabik


astalker	clbn	atodorov	apetro	valgreens	bitdeli-chef


meetbryce	unseen1980	cminhho	dwmkerr	kuzmeig1	dominickolbe


gsamokovarov	grvcoelho	yassirh	bargaorobalo	hermankan	jesselpalmer


capaj	johnnyghost	jordanyee	whoan	nacyot	mariolamacchia


mischkl	michaelmov	kirstein	mo-gr	mortonfox	cryptojuice


nktssh	olafahn	olov	vorktanamobay	QuietHeartThinkingFar	raphaelfruneaux


sahat	ganchiku	kaneshin	imaimiami	dooart	thomastuts


UrielMiranda	vkarampinis	grapswiz	coderhaoxin	giantray	ntaoo


seyyah	dchest

Name		Name	Last commit message	Last commit date
Latest commit History 581 Commits
LICENSE		LICENSE
README-de-de.md		README-de-de.md
README-es-es.md		README-es-es.md
README-fr-fr.md		README-fr-fr.md
README-id-id.md		README-id-id.md
README-it-it.md		README-it-it.md
README-ja-jp.md		README-ja-jp.md
README-ko-kr.md		README-ko-kr.md
README-pl-pl.md		README-pl-pl.md
README-pt-br.md		README-pt-br.md
README-ro-ro.md		README-ro-ro.md
README-ru-ru.md		README-ru-ru.md
README-sr-lat.md		README-sr-lat.md
README-sr.md		README-sr.md
README-tr-tr.md		README-tr-tr.md
README-zh-cn.md		README-zh-cn.md
README.md		README.md

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

Repository files navigation

Introduction

Translations

Table of content

General

Directory structure

Markup

Naming conventions

Others

Modules

Controllers

Directives

Filters

Services

Templates

Routing

E2E Testing

i18n

Performance

Contribution

Contributors

About

Uh oh!

Releases

Packages

Uh oh!

Contributors 86

Uh oh!

License

mgechev/angularjs-style-guide

Folders and files

Latest commit

History

Repository files navigation

Introduction

Translations

Table of content

General

Directory structure

Markup

Naming conventions

Others

Modules

Controllers

Directives

Filters

Services

Templates

Routing

E2E Testing

i18n

Performance

Contribution

Contributors

About

Topics

Resources

License

Code of conduct

Security policy

Uh oh!

Stars

Watchers

Forks

Releases

Packages 0

Uh oh!

Contributors 86

Uh oh!

Packages