WWSTCERT-8802 Inovelli: adding support for vzm30 (zigbee on/off) and adding supported button events to all de…

drivers/SmartThings/zigbee-switch/fingerprints.yml

@@ -2359,6 +2359,11 @@ zigbeeManufacturer:
     model: NEXENTRO Dimming Actuator
     deviceProfileName: on-off-level
   # Inovelli
+  - id: "Inovelli/VZM30-SN"
+    deviceLabel: "Inovelli On/Off Blue Series"
+    manufacturer: Inovelli
+    model: VZM30-SN
+    deviceProfileName: inovelli-vzm30-sn
   - id: "Inovelli/VZM31-SN"
     deviceLabel: "Inovelli 2-in-1 Blue Series"
     manufacturer: Inovelli

drivers/SmartThings/zigbee-switch/profiles/inovelli-vzm30-sn.yml

@@ -0,0 +1,231 @@
+name: inovelli-vzm30-sn
+components:
+  - id: main
+    capabilities:
+    - id: switch
+      version: 1
+    - id: switchLevel
+      version: 1
+    - id: temperatureMeasurement
+      version: 1
+    - id: relativeHumidityMeasurement
+      version: 1
+    - id: powerMeter
+      version: 1
+    - id: energyMeter
+      version: 1
+    - id: refresh
+      version: 1
+    - id: firmwareUpdate
+      version: 1
+    categories:
+    - name: Switch
+  - id: button1
+    label: Down Button
+    capabilities:
+    - id: button
+      version: 1
+    categories:
+    - name: RemoteController
+  - id: button2
+    label: Up Button
+    capabilities:
+      - id: button
+        version: 1
+    categories:
+      - name: RemoteController
+  - id: button3
+    label: Config Button
+    capabilities:
+      - id: button
+        version: 1
+    categories:
+      - name: RemoteController
+preferences:
+  - name: "notificationChild"
+    title: "Add Child Device - Notification"
+    description: "Create Separate Child Device for Notification Control"
+    required: false
+    preferenceType: boolean
+    definition:
+      default: false
+  - name: "notificationType"
+    title: "Notification Effect"
+    description: "This is the notification effect used by the notification child device"
+    required: false
+    preferenceType: enumeration
+    definition:
+      options:
+        "255": "Clear"
+        "1": "Solid"
+        "2": "Fast Blink"
+        "3": "Slow Blink"
+        "4": "Pulse"
+        "5": "Chase"
+        "6": "Open/Close"
+        "7": "Small-to-Big"
+        "8": "Aurora"
+        "9": "Slow Falling"
+        "10": "Medium Falling"
+        "11": "Fast Falling"
+        "12": "Slow Rising"
+        "13": "Medium Rising"
+        "14": "Fast Rising"
+        "15": "Medium Blink"
+        "16": "Slow Chase"
+        "17": "Fast Chase"
+        "18": "Fast Siren"
+        "19": "Slow Siren"
+      default: 1
+  - name: "parameter258"
+    title: "258. Switch Mode"
+    description: "Use as a Dimmer or an On/Off switch"
+    required: false
+    preferenceType: enumeration
+    definition:
+      options:
+        "0": "Dimmer"
+        "1": "On/Off (default)"
+      default: 1
+  - name: "parameter22"
+    title: "22. Aux Switch Type"
+    description: "Set the Aux switch type. Smart Bulb Mode does not work in Dumb 3-Way Switch mode."
+    required: false
+    preferenceType: enumeration
+    definition:
+      options:
+        "0": "None"
+        "1": "3-Way Aux Switch (default)"
+      default: 1
+  - name: "parameter52"
+    title: "52. Smart Bulb Mode"
+    description: "For use with Smart Bulbs that need constant power and are controlled via commands rather than power. Smart Bulb Mode does not work in Dumb 3-Way Switch mode."
+    required: false
+    preferenceType: enumeration
+    definition:
+      options:
+        "0": "Disabled (default)"
+        "1": "Smart Bulb Mode"
+      default: 0
+  - name: "parameter1"
+    title: "1. Dimming Speed (Remote)"
+    description: "This changes the speed that the light dims up when controlled from the hub. A setting of '0' turns the light immediately on. Increasing the value slows down the transition speed. Value is multiplied by 100ms. 
+  Default=25 (2500ms or 2.5s)"
+    required: false
+    preferenceType: number
+    definition:
+      minimum: 0
+      maximum: 126
+      default: 25
+  - name: "parameter2"
+    title: "2. Dimming Speed (Local)"
+    description: "This changes the speed that the light dims up when controlled at the switch. A setting of '0' turns the light immediately on. Increasing the value slows down the transition speed. Value is multiplied by 100ms. 
+  (i.e 25 = 2500ms or 2.5s) Default=127 (Sync with parameter 1)"
+    required: false
+    preferenceType: number
+    definition:
+      minimum: 0
+      maximum: 127
+      default: 127
+  - name: "parameter3"
+    title: "3. Ramp Rate (Remote)"
+    description: "This changes the speed that the light turns on when controlled from the hub. A setting of '0' turns the light immediately on. Increasing the value slows down the transition speed. Value is multiplied by 100ms. 
+  (i.e 25 = 2500ms or 2.5s) Default=0"
+    required: false
+    preferenceType: number
+    definition:
+      minimum: 0
+      maximum: 127
+      default: 0
+  - name: "parameter4"
+    title: "4. Ramp Rate (Local)"
+    description: "This changes the speed that the light turns on when controlled at the switch. A setting of '0' turns the light immediately on. Increasing the value slows down the transition speed. Value is multiplied by 100ms. 
+  (i.e 25 = 2500ms or 2.5s) Default=127 (Sync with parameter 3)"
+    required: false
+    preferenceType: number
+    definition:
+      minimum: 0
+      maximum: 127
+      default: 127
+  - name: "parameter11"
+    title: "11. Invert Switch"
+    description: "Inverts the orientation of the switch. Useful when the switch is installed upside down. Essentially up becomes down and down becomes up."
+    required: false
+    preferenceType: enumeration
+    definition:
+      options:
+        "0": "No (default)"
+        "1": "Yes"
+      default: 0
+  - name: "parameter15"
+    title: "15. Level After Power Restored"
+    description: "The level the switch will return to when power is restored after power failure.
+  0=Off
+  1-100=Set Level
+  101=Use previous level."
+    required: false
+    preferenceType: number
+    definition:
+      minimum: 0
+      maximum: 101
+      default: 101
+  - name: "parameter95"
+    title: "95. LED Indicator Color (w/On)"
+    description: "Set the color of the Full LED Indicator when the load is on."
+    required: false
+    preferenceType: enumeration
+    definition:
+      options:
+        "0": "Red"
+        "7": "Orange"
+        "28": "Lemon"
+        "64": "Lime"
+        "85": "Green"
+        "106": "Teal"
+        "127": "Cyan"
+        "148": "Aqua"
+        "170": "Blue (default)"
+        "190": "Violet"
+        "212": "Magenta"
+        "234": "Pink"
+        "255": "White"
+      default: 170
+  - name: "parameter96"
+    title: "96. LED Indicator Color (w/Off)"
+    description: "Set the color of the Full LED Indicator when the load is off."
+    required: false
+    preferenceType: enumeration
+    definition:
+      options:
+        "0": "Red"
+        "7": "Orange"
+        "28": "Lemon"
+        "64": "Lime"
+        "85": "Green"
+        "106": "Teal"
+        "127": "Cyan"
+        "148": "Aqua"
+        "170": "Blue (default)"
+        "190": "Violet"
+        "212": "Magenta"
+        "234": "Pink"
+        "255": "White"
+      default: 170
+  - name: "parameter97"
+    title: "97. LED Indicator Intensity (w/On)"
+    description: "Set the intensity of the Full LED Indicator when the load is on."
+    required: false
+    preferenceType: number
+    definition:
+      minimum: 0
+      maximum: 100
+      default: 50
+  - name: "parameter98"
+    title: "98. LED Indicator Intensity (w/Off)"
+    description: "Set the intensity of the Full LED Indicator when the load is off."
+    required: false
+    preferenceType: number
+    definition:
+      minimum: 0
+      maximum: 100
+      default: 5

drivers/SmartThings/zigbee-switch/src/init.lua

@@ -66,6 +66,8 @@ local zigbee_switch_driver_template = {
     capabilities.energyMeter,
     capabilities.motionSensor,
     capabilities.illuminanceMeasurement,
+    capabilities.relativeHumidityMeasurement,
+    capabilities.temperatureMeasurement,
   },
   sub_drivers = {
     lazy_load_if_possible("non_zigbee_devices"),

drivers/SmartThings/zigbee-switch/src/inovelli/can_handle.lua

@@ -4,6 +4,7 @@
 
 return function(opts, driver, device)
   local INOVELLI_FINGERPRINTS = {
+    { mfr = "Inovelli", model = "VZM30-SN" },
     { mfr = "Inovelli", model = "VZM31-SN" },
     { mfr = "Inovelli", model = "VZM32-SN" }
   }

drivers/SmartThings/zigbee-switch/src/inovelli/common.lua

@@ -4,9 +4,27 @@
 local clusters = require "st.zigbee.zcl.clusters"
 local device_management = require "st.zigbee.device_management"
 local OTAUpgrade = require("st.zigbee.zcl.clusters").OTAUpgrade
+local zigbee_constants = require "st.zigbee.constants"
+local capabilities = require "st.capabilities"
 
 local M = {}
 
+M.supported_button_values = {
+  ["button1"] = {"pushed","held","down_hold","pushed_2x","pushed_3x","pushed_4x","pushed_5x"},
+  ["button2"] = {"pushed","held","down_hold","pushed_2x","pushed_3x","pushed_4x","pushed_5x"},
+  ["button3"] = {"pushed","held","down_hold","pushed_2x","pushed_3x","pushed_4x","pushed_5x"}
+}
+
+-- Utility function to check if device is VZM32-SN
+function M.is_vzm32(device)
+  return device:get_model() == "VZM32-SN"
+end
+
+-- Utility function to check if device is VZM32-SN
+function M.is_vzm30(device)
+  return device:get_model() == "VZM30-SN"
+end
+
 -- Sends a generic configure for Inovelli devices (all models):
 -- - device:configure
 -- - send OTA ImageNotify
@@ -25,10 +43,31 @@ function M.base_device_configure(driver, device, private_cluster_id, mfg_code)
   device:send(device_management.build_bind_request(device, private_cluster_id, driver.environment_info.hub_zigbee_eui, 2))
 
   -- Read divisors/multipliers for power/energy reporting
-  device:send(clusters.SimpleMetering.attributes.Divisor:read(device))
+  -- Set default divisor to 1000 for VZM32-SN and VZM30-SN. In initial firmware the divisor is incorrectly set to 100.
+  if M.is_vzm32(device) or M.is_vzm30(device) then
+    device:set_field(zigbee_constants.SIMPLE_METERING_DIVISOR_KEY, 1000, {persist = true})
+  else
+    device:send(clusters.SimpleMetering.attributes.Divisor:read(device))
+  end
   device:send(clusters.SimpleMetering.attributes.Multiplier:read(device))
   device:send(clusters.ElectricalMeasurement.attributes.ACPowerDivisor:read(device))
   device:send(clusters.ElectricalMeasurement.attributes.ACPowerMultiplier:read(device))
+
+  for _, component in pairs(device.profile.components) do
+    if component.id ~= "main" then
+      device:emit_component_event(
+        component,
+        capabilities.button.supportedButtonValues(
+          M.supported_button_values[component.id],
+          { visibility = { displayed = false } }
+        )
+      )
+      device:emit_component_event(
+        component,
+        capabilities.button.numberOfButtons({value = 1}, { visibility = { displayed = false } })
+      )
+    end
+  end
 end
 
 return M