Propable issue with Shelly Outdoor Plug S Gen 3

[Araghast38]

Hello,
I don't know if it is an issue but i plug 1 on the new Shelly Outdoor Plug S Gen 3 device to a sloar panel and the response of the request is the following :

{"ble":{},"cloud":{"connected":true},"mqtt":{"connected":false},"plugs_ui":{},"switch0":{"id":0,"source":"HTTP_in","output":true,"apower":-188.9,"voltage":240.4,"freq":50,"current":0.791,"aenergy":{"total":76.801,"by_minute":[3173.608,3173.608,3385.182],"minute_ts":1751558160},"ret_aenergy":{"total":76.801,"by_minute":[3173.608,3173.608,3385.182],"minute_ts":1751558160},"temperature":{"tC":47.2,"tF":117}},"sys":{"mac":"E4B063DBE464","restart_required":false,"time":"17:56","unixtime":1751558217,"uptime":1677,"ram_size":220132,"ram_free":121204,"fs_size":1048576,"fs_free":712704,"cfg_rev":11,"kvs_rev":0,"schedule_rev":0,"webhook_rev":0,"available_updates":{"beta":{"version":"1.7.0-beta2"}},"reset_reason":3},"wifi":{"sta_ip":"XXXXX","status":"got ip","ssid":"XXXXX,"rssi":-55},"ws":{"connected":false}}

The apower is correctly negative but ...
The issue for me is the "ret_aenergy" need to be negative but it not. And the "aenergy" have the same value of "ret_aenergy".

I don't know if it is nodered / Shelly or this node who have issue.
If someone have the same issue to orient me on a solution ?

Best regards

[Araghast38]

With a screen capture it is propably more visual

[windkh]

The data comes directly from the shelly. The nodes do not alter these vales

[Araghast38]

After more test, i confirm the Shelly Outdoor Plug S Gen 3 send the absolut sum of the positive and negative measure and only the positive measure.

After some traitment, i can retrieve the sum of the only positive consumption and on the other hand only the negative consumption.

Sorry to disturb you.
Best regards

[windkh]

@Araghast38 ah nice to hear. Thank you for the info