-
Notifications
You must be signed in to change notification settings - Fork 2
/
Copy pathfb_ili9340.c
140 lines (110 loc) · 3.16 KB
/
fb_ili9340.c
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
// SPDX-License-Identifier: GPL-2.0+
/*
* FB driver for the ILI9340 LCD Controller
*
* Copyright (C) 2013 Noralf Tronnes
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <video/mipi_display.h>
#include "fbtft.h"
#define DRVNAME "fb_ili9340"
#define WIDTH 240
#define HEIGHT 320
/* Init sequence taken from: Arduino Library for the Adafruit 2.2" display */
static int init_display(struct fbtft_par *par)
{
par->fbtftops.reset(par);
write_reg(par, 0xEF, 0x03, 0x80, 0x02);
write_reg(par, 0xCF, 0x00, 0XC1, 0X30);
write_reg(par, 0xED, 0x64, 0x03, 0X12, 0X81);
write_reg(par, 0xE8, 0x85, 0x00, 0x78);
write_reg(par, 0xCB, 0x39, 0x2C, 0x00, 0x34, 0x02);
write_reg(par, 0xF7, 0x20);
write_reg(par, 0xEA, 0x00, 0x00);
/* Power Control 1 */
write_reg(par, 0xC0, 0x23);
/* Power Control 2 */
write_reg(par, 0xC1, 0x10);
/* VCOM Control 1 */
write_reg(par, 0xC5, 0x3e, 0x28);
/* VCOM Control 2 */
write_reg(par, 0xC7, 0x86);
/* COLMOD: Pixel Format Set */
/* 16 bits/pixel */
write_reg(par, MIPI_DCS_SET_PIXEL_FORMAT, 0x55);
/* Frame Rate Control */
/* Division ratio = fosc, Frame Rate = 79Hz */
write_reg(par, 0xB1, 0x00, 0x18);
/* Display Function Control */
write_reg(par, 0xB6, 0x08, 0x82, 0x27);
/* Gamma Function Disable */
write_reg(par, 0xF2, 0x00);
/* Gamma curve selection */
write_reg(par, MIPI_DCS_SET_GAMMA_CURVE, 0x01);
/* Positive Gamma Correction */
write_reg(par, 0xE0,
0x0F, 0x31, 0x2B, 0x0C, 0x0E, 0x08, 0x4E, 0xF1,
0x37, 0x07, 0x10, 0x03, 0x0E, 0x09, 0x00);
/* Negative Gamma Correction */
write_reg(par, 0xE1,
0x00, 0x0E, 0x14, 0x03, 0x11, 0x07, 0x31, 0xC1,
0x48, 0x08, 0x0F, 0x0C, 0x31, 0x36, 0x0F);
write_reg(par, MIPI_DCS_EXIT_SLEEP_MODE);
mdelay(120);
write_reg(par, MIPI_DCS_SET_DISPLAY_ON);
return 0;
}
static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
{
write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS,
xs >> 8, xs & 0xFF, xe >> 8, xe & 0xFF);
write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS,
ys >> 8, ys & 0xFF, ye >> 8, ye & 0xFF);
write_reg(par, MIPI_DCS_WRITE_MEMORY_START);
}
#define ILI9340_MADCTL_MV 0x20
#define ILI9340_MADCTL_MX 0x40
#define ILI9340_MADCTL_MY 0x80
static int set_var(struct fbtft_par *par)
{
u8 val;
switch (par->info->var.rotate) {
case 270:
val = ILI9340_MADCTL_MV;
break;
case 180:
val = ILI9340_MADCTL_MY;
break;
case 90:
val = ILI9340_MADCTL_MV | ILI9340_MADCTL_MY | ILI9340_MADCTL_MX;
break;
default:
val = ILI9340_MADCTL_MX;
break;
}
/* Memory Access Control */
write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, val | (par->bgr << 3));
return 0;
}
static struct fbtft_display display = {
.regwidth = 8,
.width = WIDTH,
.height = HEIGHT,
.fbtftops = {
.init_display = init_display,
.set_addr_win = set_addr_win,
.set_var = set_var,
},
};
FBTFT_REGISTER_DRIVER(DRVNAME, "ilitek,ili9340", &display);
MODULE_ALIAS("spi:" DRVNAME);
MODULE_ALIAS("platform:" DRVNAME);
MODULE_ALIAS("spi:ili9340");
MODULE_ALIAS("platform:ili9340");
MODULE_DESCRIPTION("FB driver for the ILI9340 LCD Controller");
MODULE_AUTHOR("Noralf Tronnes");
MODULE_LICENSE("GPL");