port to RTduino

Author: mysterywolf

.github/ISSUE_TEMPLATE.md

@@ -1,8 +1,20 @@
-#include <Adafruit_BusIO_Register.h>
+/*
+ * Copyright (c) 2021-2022, RTduino Development Team
+ *
+ * SPDX-License-Identifier: MIT
+ *
+ * https://github.com/RTduino/RTduino
+ * https://gitee.com/rtduino/RTduino
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ *            Adafruit Team    First version
+ * 2022-02-19     Meco Man     port to RTduino
+ */
 
-#if !defined(SPI_INTERFACES_COUNT) ||                                          \
-    (defined(SPI_INTERFACES_COUNT) && (SPI_INTERFACES_COUNT > 0))
+#include <Adafruit_BusIO_Register.h>
 
+#ifdef RTDUINO_USING_WIRE
 /*!
  *    @brief  Create a register we access over an I2C Device (which defines the
  * bus and address)
@@ -21,13 +33,18 @@ Adafruit_BusIO_Register::Adafruit_BusIO_Register(Adafruit_I2CDevice *i2cdevice,
                                                  uint8_t byteorder,
                                                  uint8_t address_width) {
   _i2cdevice = i2cdevice;
-  _spidevice = nullptr;
+#ifdef RTDUINO_USING_SPI
+  _spidevice = NULL;
+#endif /* RTDUINO_USING_SPI */
   _addrwidth = address_width;
   _address = reg_addr;
   _byteorder = byteorder;
   _width = width;
+  _cached = 0;
 }
+#endif /* RTDUINO_USING_WIRE */
 
+#ifdef RTDUINO_USING_SPI
 /*!
  *    @brief  Create a register we access over an SPI Device (which defines the
  * bus and CS pin)
@@ -50,11 +67,12 @@ Adafruit_BusIO_Register::Adafruit_BusIO_Register(Adafruit_SPIDevice *spidevice,
                                                  uint8_t address_width) {
   _spidevice = spidevice;
   _spiregtype = type;
-  _i2cdevice = nullptr;
+  _i2cdevice = NULL;
   _addrwidth = address_width;
   _address = reg_addr;
   _byteorder = byteorder;
   _width = width;
+  _cached = 0;
 }
 
 /*!
@@ -86,7 +104,9 @@ Adafruit_BusIO_Register::Adafruit_BusIO_Register(
   _address = reg_addr;
   _byteorder = byteorder;
   _width = width;
+  _cached = 0;
 }
+#endif /* RTDUINO_USING_SPI */
 
 /*!
  *    @brief  Write a buffer of data to the register location
@@ -99,10 +119,12 @@ bool Adafruit_BusIO_Register::write(uint8_t *buffer, uint8_t len) {
 
   uint8_t addrbuffer[2] = {(uint8_t)(_address & 0xFF),
                            (uint8_t)(_address >> 8)};
-
+#ifdef RTDUINO_USING_WIRE
   if (_i2cdevice) {
     return _i2cdevice->write(buffer, len, true, addrbuffer, _addrwidth);
   }
+#endif /* RTDUINO_USING_WIRE */
+#ifdef RTDUINO_USING_SPI
   if (_spidevice) {
     if (_spiregtype == ADDRESSED_OPCODE_BIT0_LOW_TO_WRITE) {
       // very special case!
@@ -129,6 +151,7 @@ bool Adafruit_BusIO_Register::write(uint8_t *buffer, uint8_t len) {
     }
     return _spidevice->write(buffer, len, addrbuffer, _addrwidth);
   }
+#endif /* RTDUINO_USING_SPI */
   return false;
 }
 
@@ -168,7 +191,7 @@ bool Adafruit_BusIO_Register::write(uint32_t value, uint8_t numbytes) {
  */
 uint32_t Adafruit_BusIO_Register::read(void) {
   if (!read(_buffer, _width)) {
-    return -1;
+    return (uint32_t)-1;
   }
 
   uint32_t value = 0;
@@ -201,10 +224,12 @@ uint32_t Adafruit_BusIO_Register::readCached(void) { return _cached; }
 bool Adafruit_BusIO_Register::read(uint8_t *buffer, uint8_t len) {
   uint8_t addrbuffer[2] = {(uint8_t)(_address & 0xFF),
                            (uint8_t)(_address >> 8)};
-
+#ifdef RTDUINO_USING_WIRE
   if (_i2cdevice) {
     return _i2cdevice->write_then_read(addrbuffer, _addrwidth, buffer, len);
   }
+#endif /* RTDUINO_USING_WIRE */
+#ifdef RTDUINO_USING_SPI
   if (_spidevice) {
     if (_spiregtype == ADDRESSED_OPCODE_BIT0_LOW_TO_WRITE) {
       // very special case!
@@ -230,6 +255,7 @@ bool Adafruit_BusIO_Register::read(uint8_t *buffer, uint8_t len) {
     }
     return _spidevice->write_then_read(addrbuffer, _addrwidth, buffer, len);
   }
+#endif /* RTDUINO_USING_SPI */
   return false;
 }
 
@@ -361,5 +387,3 @@ void Adafruit_BusIO_Register::setAddress(uint16_t address) {
 void Adafruit_BusIO_Register::setAddressWidth(uint16_t address_width) {
   _addrwidth = address_width;
 }
-
-#endif // SPI exists

.github/PULL_REQUEST_TEMPLATE.md

@@ -1,13 +1,28 @@
+/*
+ * Copyright (c) 2021-2022, RTduino Development Team
+ *
+ * SPDX-License-Identifier: MIT
+ *
+ * https://github.com/RTduino/RTduino
+ * https://gitee.com/rtduino/RTduino
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ *            Adafruit Team    First version
+ * 2022-02-19     Meco Man     port to RTduino
+ */
+
 #ifndef Adafruit_BusIO_Register_h
 #define Adafruit_BusIO_Register_h
 
 #include <Arduino.h>
 
-#if !defined(SPI_INTERFACES_COUNT) ||                                          \
-    (defined(SPI_INTERFACES_COUNT) && (SPI_INTERFACES_COUNT > 0))
-
+#ifdef RTDUINO_USING_WIRE
 #include <Adafruit_I2CDevice.h>
+#endif /* RTDUINO_USING_WIRE */
+#ifdef RTDUINO_USING_SPI
 #include <Adafruit_SPIDevice.h>
+#endif /* RTDUINO_USING_SPI */
 
 typedef enum _Adafruit_BusIO_SPIRegType {
   ADDRBIT8_HIGH_TOREAD = 0,
@@ -42,10 +57,12 @@ typedef enum _Adafruit_BusIO_SPIRegType {
  */
 class Adafruit_BusIO_Register {
 public:
+#ifdef RTDUINO_USING_WIRE
   Adafruit_BusIO_Register(Adafruit_I2CDevice *i2cdevice, uint16_t reg_addr,
                           uint8_t width = 1, uint8_t byteorder = LSBFIRST,
                           uint8_t address_width = 1);
-
+#endif /* RTDUINO_USING_WIRE */
+#ifdef RTDUINO_USING_SPI
   Adafruit_BusIO_Register(Adafruit_SPIDevice *spidevice, uint16_t reg_addr,
                           Adafruit_BusIO_SPIRegType type, uint8_t width = 1,
                           uint8_t byteorder = LSBFIRST,
@@ -56,7 +73,7 @@ class Adafruit_BusIO_Register {
                           Adafruit_BusIO_SPIRegType type, uint16_t reg_addr,
                           uint8_t width = 1, uint8_t byteorder = LSBFIRST,
                           uint8_t address_width = 1);
-
+#endif /* RTDUINO_USING_SPI */
   bool read(uint8_t *buffer, uint8_t len);
   bool read(uint8_t *value);
   bool read(uint16_t *value);
@@ -75,14 +92,17 @@ class Adafruit_BusIO_Register {
   void println(Stream *s = &Serial);
 
 private:
+#ifdef RTDUINO_USING_WIRE
   Adafruit_I2CDevice *_i2cdevice;
+#endif /* RTDUINO_USING_WIRE */
+#ifdef RTDUINO_USING_SPI
   Adafruit_SPIDevice *_spidevice;
   Adafruit_BusIO_SPIRegType _spiregtype;
+#endif /* RTDUINO_USING_SPI */
   uint16_t _address;
   uint8_t _width, _addrwidth, _byteorder;
-  uint8_t _buffer[4]; // we won't support anything larger than uint32 for
-                      // non-buffered read
-  uint32_t _cached = 0;
+  uint8_t _buffer[4]; // we won't support anything larger than uint32 for non-buffered read
+  uint32_t _cached;
 };
 
 /*!
@@ -101,5 +121,4 @@ class Adafruit_BusIO_RegisterBits {
   uint8_t _bits, _shift;
 };
 
-#endif // SPI exists
 #endif // BusIO_Register_h